MHI Hydrolution Indoor Units: HMA, HMS and HSB

On a Mitsubishi Heavy Industries Hydrolution system the indoor unit is an HMA, HMS or HSB. Only the HMA includes a water heater. HMS and HSB need a separate tank if you want domestic hot water.

These descriptions come from installation manual PSC012D169A (cover date 202312), printed pages 23–24, for the 60 and 100 sizes named on that cover. Q-ton and EZY are separate MHI product names, not the Hydrolution HSB/HMA/HMS plus FDCW combination in this book.

Indoor type What PSC012D169A says it contains Hot water
HMA60/100-W Water heater, expansion vessel, safety valve, electrical heater, plate heat exchanger, sensors, gauge, circulation pump and controller Water heater is built in
HMS60/100-W Expansion vessel, safety valve, electrical heater, plate heat exchanger, sensors, gauge, circulation pump and controller A tank is also needed if hot water is required
HSB60/100-W Plate heat exchanger. An expansion vessel, shut-off valves, safety valve, electric heater and circulation pump must be installed to complete the heating system A 3-way valve and tank are also needed if hot water is required

The same HSB page says the system is controlled by RC-HY20-W or RC-HY40-W, and that the outdoor unit provides heat for space heating and domestic hot water using outdoor air down to −20°C. PT300 and PT500 are the tanks named on the installation-manual cover.

Which outdoor codes appear on the same covers

PSC012D169A groups HSB60-W, HMA60-W and HMS60-W with FDCW60VNX-A and FDCW60VNX-W, and groups HSB100-W, HMA100-W and HMS100-W with FDCW71VNX-A, FDCW71VNX-W and FDCW100VNX-A, plus the PT tanks and RC-HY controllers. That cover list is not a one-to-one pairing table.

An earlier manual, PSC012D169, is titled for R32 only and lists HSB60-W with FDCW60VNX-W and HSB100-W with FDCW71VNX-W. If your indoor unit is an HMA or HMS, D169A is the installation book that names those types on the cover.

User’s manual PSB012A016B also prints HSB140, HMS140-S, FDCW140VNX-A and PT300-V2 on its cover. Matching installation-manual pages that describe those 140-class units the same way as the 60/100 pages above are not among the files used here.

This is not an Ecodan cylinder

PUZ-WM, PUZ-WZ, QUHZ, PAC-IF07/08 (FTC) and EHPT cylinder codes are Mitsubishi Electric Ecodan. If the indoor plate says HSB, HMA, HMS or RC-HY, or the outdoor says FDCW…VNX, use the Hydrolution books above. See the Ecodan versus Hydrolution guide if only a Mitsubishi sticker is readable.

FAQ

Does an HMA already have a hot-water cylinder?

D169A says HMA60/100-W is equipped with a water heater as well as the electrical heater, pump and controller. HMS and HSB need a separate tank for domestic hot water.

Is Q-ton or EZY the same as a Hydrolution HMA?

No. Q-ton and EZY are separate MHI names. This page describes the Hydrolution indoor types printed in PSC012D169A.

What to tell your engineer

  • The indoor type and size (HMA, HMS or HSB, and 60 or 100 if that is what the plate shows).
  • The outdoor code (FDCW60, 71 or 100, and whether it ends VNX-A or VNX-W).
  • Whether a PT300 or PT500 tank is fitted, and whether the controller is RC-HY20-W or RC-HY40-W.
  • The document number on your manual (PSC012D169A, PSC012D169 or PSB012A016B).

Manual references

Page numbers are those printed in the manual unless marked as a PDF page.

Related guides

Safety first

Owners can read the plates. Refrigerant pipework, electrical heaters and hydraulic connections are for a qualified engineer.

Still stuck?

Ask the Heat Pump Assistant. Include your brand, model or controller, and the full code or message on screen. If you need hands-on help, Book a Service. You can also browse all our Help Guides.

Independent guide, not affiliated with or endorsed by Mitsubishi Heavy Industries.