Last reviewed: November 2026. Help for heat pump owners in the UK.
Short answer
A short cloud of steam or vapour from the outdoor unit is usually a normal defrost cycle in cold, damp weather. You may also hear a whoosh, see water dripping and notice heating pause briefly. Never try to speed up defrosting with hot water, a heater or anything the manufacturer has not recommended. Thick ice that keeps growing, an error code, or dark smoke or a burning smell needs a closer look and often an engineer.
What normal defrost steam looks like
When the outdoor coil ices up, the heat pump runs a defrost cycle. You may see a short cloud of steam or vapour, hear a whoosh or hiss, notice water dripping from underneath and find that heating pauses briefly, then carries on. That combination is normal operation on an air-to-water heat pump, not a breakdown.
For a brand-specific walk-through, see steam from a Daikin Altherma, the Daikin defrost cycle guide or Vaillant defrost.
Never try to speed up defrosting
Daikin’s Altherma 3 user reference guides are explicit: do not use cleaning materials or other means to accelerate the defrosting process, other than those recommended by the manufacturer. In practice that means no hot water, no chipping of ice and no heat gun. Leave the fan and the casing alone. You can clear loose snow from around the unit by hand so air can still move.
When it is not just defrost steam
- The cloud goes on for a long time with no pause, or the unit seems stuck in defrost.
- Thick ice keeps growing, or ice builds up under the unit. See iced up or not defrosting.
- There is an error code on the controller. Use the brand error-code guide.
- You see dark smoke, or smell burning, rather than a clean white or grey vapour.
If you are unsure, start at heat pump help or ask a question in the chat on this page.
Use the chat above to ask a question about your heat pump. We do not pass your details on to installers.
FAQs
Is steam from the outdoor unit a fault?
Usually not, if it appears for a few minutes during a defrost cycle and then stops. The unit is melting frost off the coil. A Daikin-specific version of this is in steam from a Daikin Altherma outdoor unit.
Can I speed up defrosting if the unit is steaming?
No. Daikin’s user guides say you must not use cleaning materials or other means to accelerate defrosting, other than those recommended by the manufacturer. Do not pour hot water on the unit, chip the ice or use a heat gun. Follow the same rule on other brands unless your manual names a manufacturer-approved method.
Could the steam be a refrigerant leak?
A short white cloud during defrost is usually melted frost, not a typical refrigerant leak. If you see dark smoke, smell burning, or still suspect a leak, follow the safety steps in heat pump leaking water and call an engineer.
What if the steam goes on and on?
A cycle that never seems to finish, thick ice that keeps building, or an error code on the controller is not a normal short defrost. See iced up or not defrosting.