Heat Pump Help for UK Owners

Last reviewed: November 2026. Help for heat pump owners in the UK.

Short answer

This site is independent help for people who already have a heat pump in the UK. Start with the error-code guide for your brand, do the safe owner checks below and use the chat on this page to ask a question. We do not pass your details on to installers. If the heating has stopped, write down any code exactly and do not keep resetting it.

Four steps: find your brand, read the error code, do safe owner checks and ask a question in the chat
Start with your brand, the exact code and the checks you can do safely.

How this site helps

Ask My Heatpump is for people who already have a heat pump and want clear, owner-safe answers. You can look up an error code, check a setting, work out whether a noise or a drip is normal and ask a question in the chat on this page. We write in UK English and we check the facts against official manufacturer documents before a guide goes live.

We do not use this page to send leads to installers. If you need a visit, contact your existing engineer or the manufacturer. If you want a second look at what the controller is telling you, start with the chat above.

Safe checks before you call anyone

These checks come up again and again in manufacturer user guides. They do not replace a service visit and they do not involve opening a casing or touching wiring.

  • Power and mode. Confirm the indoor and outdoor isolators are on and that the controller is in the heating or hot-water mode you expect, not holiday or standby.
  • The exact code. Write down any error, fault, status or alarm code exactly, including letters, numbers and dashes, before you reset anything.
  • Water pressure. Many systems ask you to keep pressure in a published range. On Daikin Altherma 3 M user guides, that owner check is to keep water pressure above 1 bar. Other brands set their own range in the user manual.
  • The outdoor unit. Leaves, snow or stored items blocking the airflow are a common cause of poor performance and of ice that will not clear. Clear loose debris by hand. Do not chip ice or pour hot water on the unit.
  • Schedules. After a power cut the clock can be wrong, or holiday mode may have been left on.

If rooms are still cold after those checks, or a code keeps returning, stop resetting and use the brand error-code guide below.

Help by brand

Cards naming Daikin, Vaillant, Grant, Ideal, Samsung, Ecodan and MHI Hydrolution
Open the error-code guide that matches the name on your outdoor unit.

Open the error-code pillar that matches the name on your outdoor unit. Each pillar links on to the settings, servicing and troubleshooting guides for that make.

The full list of owner guides is on the guides page.

Servicing and ongoing advice

UK manufacturers and the Heat Pump Association expect a yearly service by a competent person, written into a service record. Many warranties depend on it. What the visit should include, how often to book it and the cost figures manufacturers have published are in the heat pump servicing guide.

For day-to-day running, use the chat on this page if you are unsure whether something is normal. First-stop guides now cover a heat pump that is not working, error codes by brand, a noise, water under the unit, a unit that looks iced up, steam from the outdoor unit, whether to leave the heat pump on all the time, a blank or sleeping display, an app that is offline, water pressure, radiators that are not getting hot and higher electricity use. Brand-specific Daikin guides are still linked from those pages.

Use the chat above to ask a question about your heat pump. We do not pass your details on to installers.

FAQs

Where should I start if my heat pump is not working?

Note any error or alarm code exactly as it appears, check that the system has power and that the controller is in the mode you expect, then open the error-code guide for your brand from this page. Use the chat above if you want help reading what you have found. If you smell burning, see smoke or a breaker keeps tripping, isolate the system if you can do so safely and call an engineer.

Do I need to know the brand before I can get help?

It helps a lot, because codes and menus are different on each make. The name is usually on the outdoor unit, the indoor controller or the handover pack. We publish owner guides for Daikin Altherma, Vaillant aroTHERM, Grant Aerona, Ideal Logic Air, Samsung EHS, Mitsubishi Ecodan and MHI Hydrolution.

Can I fix an error code myself?

Some codes have a safe owner check, such as low water pressure on some systems, a blocked outdoor unit or a schedule left in holiday mode. Many codes need a qualified engineer. Follow the brand guide, do not open the casing and do not keep resetting a code that returns.

Will you send my question to an installer?

No. Ask a question in the chat on this page. We do not pass owner details on to installers. If you already have a servicing arrangement, you can contact that engineer yourself when a visit is needed.

Is this official manufacturer support?

No. Ask My Heatpump is an independent help site. We check facts against official user manuals and manufacturer documents, but we are not affiliated with, endorsed by or sponsored by those manufacturers. For warranty work, contact the manufacturer or the installer who looks after your system.

Sources we checked

This is general guidance only. For faults or anything electrical, please contact a qualified heat pump engineer or the manufacturer of your system.

Ask My Heat Pump is an independent help site. We are not affiliated with, endorsed by or sponsored by the heat pump manufacturers named on this page.